Products
Low Pressure Screw Air Compressor 3-5Bar 20-250HP
Low pressure screw air compressor 3-5Bar, 20-250HP, equipped with a dedicated low-pressure air end uses 25–40 % less electricity than a standard 7–8 bar unit of the same power; if the existing system is still throttling down from pressures above 0.6 MPa, the savings can exceed 40 %.
Features
- • Air Horse special make in line vector control*! and PID control, it is realize fast response and ensure safety and reliability.
- • What is a low pressure compressor?
- • Low pressure air compressors are a type of compressor classified by pressure, and the discharge pressure is 1-10MPa. Models are available in piston, membrane, screw and centrifugal compressors.
Why Choose Us ?
High Quality Control
AirHorse ensure every machine Runs well more than 15 years
Quickly Effect Shipment
Stock Available + Very Quickly Effect Shipment
24 Hours Service
24 Hours Service Always at your service
AirHorse is an internationally renowned manufacturer of screw air compressors, please contact us for more information on air compressors. For a long time to provide you with high quality air compression services.
Recommend
Electric Portable Screw Air Compressor
The electric portable screw air compressor comes on an integrated wheeled / skid chassis with a tow bar and forklift pockets, so one pickup can move it, and relocation takes less than 15 minutes. No cranage or re-cabling is needed, making it perfect for sequential work across multiple sites or rapid deployment in confined urban job-spaces.
Diesel Portable Screw Air Compressor
A diesel-powered portable screw air compressor—driven by a 30–550 kW engine—operates entirely off-grid. Mounted on a wheeled trailer, skid, or crawler chassis, it can be towed straight to the job, making it perfect for roadworks, tunnels, mines, oilfields, and disaster-relief sites scattered along long corridors. Moving it around on site takes nothing more than a pickup or small tractor; no cranes or additional power distribution are required.
Screw Steam Compressor
screw steam compressor—often referred to simply as an “MVR screw compressor”—is a compressor dedicated to water-vapor service and is widely used in Mechanical Vapor Recompression (MVR) evaporation, concentration, and drying systems. Its key task is to compress low-temperature, low-pressure secondary vapor (typically produced by self-evaporation or flash evaporation of the process liquid) to a slightly higher pressure, raising its saturation temperature to about 195 °C; the resulting higher-energy steam is then returned to the process as a heat source, enabling its reuse.
Centrifugal Steam Compressor
A centrifugal steam compressor is a vapor-compression device that converts the kinetic energy of water vapor into pressure energy through a high-speed impeller. It is a common core component in Mechanical Vapor Recompression (MVR) systems and is especially well suited to high-flow, low-pressure-ratio applications. Compared with screw steam compressors, the centrifugal version delivers larger capacities, oil-free operation, and lower vibration, making it the preferred energy-efficiency upgrade for large-scale evaporation, distillation, crystallization, and drying processes